Specification
2 panels, 80W each, giving a total of 160W.
Description
Mounted on the targa bar.
The cable is threaded through the targa bar and into the port engine room. It terminates on the Wind Generator / Solar Panel Controller (S+/S-).
Wind Generator and Solar Panels |
Wind Generator
Specification
S700 WIND GENERATOR Greatwatt 300W 12V
Description
Mounted on pole at aft port side. The cable travels through the pole into the port engine room. This is a 3-phase plus ground cable. It terminates on the Wind Generator / Solar Panel Controller (W1/W2/W3 and the ground to the casing).
Controller
This unit combines a charge controller for both the Wind Generator and the Solar Panels. It monitors supply from both inputs, and the charge state of the battery to determine which input source to use, and how much. It it located below the port house battery - screwed upside-down below the battery shelf. The single switch on the unit is the brake. When engaged, this shorts out the generator windings and any generated back-emf opposes blade rotation. Position 1 = engaged, 0 = off.
Charging Output
The output is connected directly across the port house battery.
Front of controller. Here are the output terminals - to the port house battery. Indicator lights display the state of the controller. |
Wind Generator / Solar Panel Circuit Diagram |
Manufacturer: Suzhou Greatwatt Energy
Supplier: Cellpower
Record[
Section: Electrical
Title: Wind Generator / Solar Panels
Date: 30-APR-2017
URL: http://cat-play-boat.blogspot.com/2017/04/wind-generator-solar-panels.html
]
Tags[
electrical, suppliers
]
No comments:
Post a Comment