Clean Raw Water Strainer

Parts / Tools

  • None
Port strainer - the starboard one is a different model but the principle is the same.
 Method
  • Close the raw water inlet sea cock.
  • Unscrew the top of the strainer and remove the strainer insert.
  • With a small paintbrush in running water, clean the strainer.
  • Remove any debris from the strainer body.
  • Replace the strainer insert and screw on the top.
  • Open the raw water inlet sea cock.
at
Labels:

No comments:

Post a Comment

Subscribe to: Post Comments (Atom)

Service Rainman Watermaker

Parts / Tools Engine oil: SAE 10W30. Most usefully in a 1l container with an integral spout. Spark plug: NGK CR5HSB, gapped to 60-70 micr...

  • Day 11: Dunwich
    Spent the morning, actually 'till 1pm, tracing through the electrics trying to find out what's keeping the batteries from fully char...
  • Water Tanks Specification and Level Indicators
    There is a water tank in each hull. The volume of each tank is 200l making a total of 400l for the boat. Starboard bilge. A sight gla...
  • Day 164: Coffs Harbour
    Still underway Gold Coast Seaway to Coffs Harbour. Some time in the night, the mounting screws for the masthead light must have come adrif...